Manual do usuário ACER AL2032W

[. . . ] Keep liquids away from the display screen, including sprays. Do not spray liquid directly - it is best to lightly spray on to a cloth and wipe. If liquid gets inside the monitor it can cause electrical shock and/or damage to the unit. [. . . ] Make sure the shape of the plug matches the shape of the socket it is inserted into, and that none of the pins are bent or otherwise damaged. Switching the Power First, switch the power on to the monitor, then switch the power on to the computer. When you see the LED on the power button go blue, this indicates the computer is ready for use. Allow about 10 seconds for the video signal to appear. If you do not see the blue light LED on the power button or a video signal, check the connections. 5 Adjusting display settings External Controls 1 POWER Power on/off Blue: power on Orange: in sleep mode Press to view OSD. Press again to enter a selection in OSD. If OSD is active, press to select or adjust OSD options. If OSD is inactive, press once, then press the buttons marked or to adjust the volume. If OSD is active, press to select or adjust OSD options. If OSD is inactive, press once, then press the buttons marked or to adjust the volume. If OSD is active, press to exit a selection in OSD. If OSD is inactive, press and the monitor will automatically optimize the position, focus and clock of your display. 2 OSD Function 3 4 UP/ PLUS DOWN / MINUS 5 AUTO 6 OSD options Please refer to "External Controls" on Page 6. Press the MENU button to open the OSD main menu. Use the buttons marked or , to select the menu option you want. Press MENU button to highlight a control, and then press or to adjust the option setting. 4. Press the AUTO button to return to the previous menu option or exit the OSD. OSD Menu Picture Brightness: This adjusts the brightness of the picture on the screen. [. . . ] Move the mouse or press any key on the keyboard to bring the monitor out of "active off" mode. " to adjust RGB color or to select color temperature. Picture shows inappropriate colors · Picture bounces or a · wave pattern is · present in the picture Image is not sized or centered properly · · Move or switch off electrical devices that may be causing interference. Inspect the monitor's video cable and ensure that none of the pins are bent. [. . . ]